Making 3d Printing Affordable!

eSUN PA100 Nylon-Like Resin

$99.90

PA100 Nylon-Like Resin is a high-strength resin material developed by eSUN for engineering and manufacturing. It has good toughness, impact resistance, good durability, low shrinkage and high precision, and is widely compatible with color screen and mono-screen printers. As an engineering-grade resin material, it can be used to make models or components such as fixtures, stencils, aircraft models, industrial parts, samples, joints, snaps, gears, etc.

0.5kg - Clear

Only 2 left in stock

Product introduction

PA100 Nylon-Like Resin is a high-strength resin material developed by eSUN for engineering and manufacturing. It has good toughness, impact resistance, good durability, low shrinkage and high precision, and is widely compatible with color screen and mono-screen printers. As an engineering-grade resin material, it can be used to make models or components such as fixtures, stencils, aircraft models, industrial parts, samples, joints, snaps, gears, etc.

The following are the parameters of this material for your reference:

 

Detailed explanation of the properties of PA100 Nylon-Like Resin

1. Good toughness and impact resistance

7ad9d75e36352a10

As shown in the picture, good toughness and impact resistance is one of the main features of this material. The model printed with PA100 Nylon-Like Resin can be folded 180 degrees without breaking. The nylon-like resin can stand the test!

 

2. Good wear resistance

11d0c06f d4298359

PA100 Nylon-Like Resin has good wear resistance, good durability and long-term stability, which makes it suitable to be used in a variety of scenarios.

 

3. High precision and low shrinkage

f6ee46c7

The third main feature of PA100 Nylon-Like Resin is high precision and low shrinkage. As shown in the picture above, the printing model has high forming accuracy, the details are visible, and the overall texture of the model is excellent, which can be said to have both appearance and quality!

Precautions for printing

1. Before you start printing, you need to shake the resin well (1-2 minutes) to prevent the components from settling. It is recommended to set long support for printing support, more than 3MM-5MM to reduce the impact of stacking on the model.

2. Consumables need to avoid prolonged exposure to light, it is recommended to store the printed resin in a separate container, and should not be returned to the original bottle.

 3D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESINPA100 Nylon-Like Resin
Viscosity(mPa·s)500
Density(g/cm3)1.05-1.15
Tensile Strength(MPa)68
Elongation at Break(%)15
Flexural Strength(MPa)35
Impact Strength(J/m)20
Tearing Strength(GPa)/
Heat Distortion Temp(℃)/
Hardness(Shore D) 75

Visit eSun for more details.

Weight0.5 kg
Brand

Colour

Clear

SKU: ES-RESPA100-500-GREY Category: Tags: , ,
    0
      0
      Your Cart
      Your cart is emptyReturn to Shop
        Calculate Shipping