ABS – Bronze 1.75mm
$25.90
ABS Bronze quality 1.75mm Filament – comes on a vacuum packed 1kg cardboard reel.
1kg - Bronze
In stock
ABS
Diameter 1.75mm2 ±0.03
Density 1.05 ±0.05g/cm3
Print Temp 220-250ºC
Hot bed 90-110ºC (required)
Surface Kapton tape, PET Sheets, ABS Slurry
- Bed adhesion can be improved by using an ABS slurry. You can make this slurry on your own by mixing small pieces of ABS filament with acetone and applying the mixture on the bed. There are also several pre-packaged versions of the product that can be purchased.
- When doing a dual extrusion print, PLA can be a good break-away support material as it does not adhere strongly to ABS. For complex prints HIPS can be used which is a dissolve-able filament that is frequently used as support material because it is easily removed with a Limonene solution
| Weight | 1 kg |
|---|---|
| Brand | |
| Colour | Bronze |
1 review for ABS – Bronze 1.75mm
Related products
Add to cart DetailsBuy NowABS Natural/Transparent quality 1.75mm Filament – comes on a vacuum packed 1KG Roll.
- Add to cart DetailsBuy Now
ABS Graphite quality 1.75mm Filament – comes on a vacuum packed 1kg cardboard reel.
- Add to cart DetailsBuy Now
PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
I found the filament to be very easy to work with, as it printed smoothly and had good adhesion to the build plate. The finished prints had a nice finish and were surprisingly strong and durable, thanks to the ABS material.
One thing to note is that the bronze color can vary slightly depending on printing settings and temperatures, so it may take some trial and error to achieve the desired color and finish
overall i would recommend this filament if you want some unique.