SUNLU High Toughness Resin. A Fast Curing 3D Resin for 2K 4K 8K LCD DLP SLA Resin 3D Printer, intended to be used to compliment a model’s sturdiness and toughness that provides certain benefits such as the capability to drill holes without having to worry about its fragility.

High Toughness Resin

Other benefits include:

• 【Hard to break while Bending】SUNLU Toughness Resin is flexible and strong enough for miniature model parts in 3D printing resins, without the fear of dropping 3D resin prints or breaks when removing supports.

• 【 Fast Curing and Great Stability】SUNLU High Toughnes 365-405nm rapid 3D printing liquid photopolymer resin has excellent fluidity for fast curing. SUNLU 3D priner resin excellent stability and proper hardness are friendly to both beginners and advanced users.

• 【 Low Shrinkage and High Precision】 SUNLU Toughnes resin is great to use when you have 3D models with lots of delicate parts that are prone to easily break off. SUNLU engineers has improved the formulation and used low shrinkage resins and monomers.

• 【 High Compatibility and Wide Applications】SUNLU Toughnes Resin has been tested on different printers to ensure that it’s suitable for most 4K/8K LCD/DLP/SLA 3D resin printers. It is ideal for 3D printing different types of functional parts, such as brackets, bases, and parts that require handle load without changing the shape.

• 【 Professional Leak-proof Design】SUNLU Flexible resin bottles have a patented leak-proof design and are packed tightly to reduce damage to the bottles during transportation. In addition,SUNLU 3D resin bottle mouth is sealed with aluminum foil to achieve double protection.

SUNLU High Toughness UV Resin Data SheetUV Resin Safety Data Sheet

Weight	1 kg
Dimensions	8 × 8 × 20 cm
Brand	SUNLU
Colour	Black, Clear, Dark Grey, White
Option	1kg

GLEN20

5

3dea is a real pleas... Read More
3dea is a real pleasure to deal with. Not only do they stock a great range of filament which you can get from other suppliers in NZ. They have a massive range of own-brand filament which is often unique to NZ and is of the highest quality. All in all, 3dea are highly recommended. Read Less
Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

Write a review!

SUNLU High Toughness Resin

eSUN High Temperature Resin

eSUN Bio eResin-PLA – Clear

3D CMYK Pigment Set for 3D Printer Resins – 4 X 30MLS

SUNLU Resin Detergent 1KG

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA