Fiberon™ PA612-CF15 Black – Polymaker
Original price was: $69.90.$59.90Current price is: $59.90.
(pre-order for mid. Feb) Industrial carbon fiber reinforced copolymer of Nylon PA6 and PA12 / Features Polymaker’s Warp-Free™ and Fiber-Adhesion™ technology
0.5kg - Black
Available on back-order
[pre-order mid Feb]
Fiberon™ PA612-CF15 is a carbon fiber reinforced polyamide filament based on a copolymer of PA6 and PA12. Thanks to its chemical structure, this product has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. In addition, the carbon fiber reinforcement and Warp-free technology enhance the dimensional stability of the prints produced with this material.
Features
- Best of PA6 and PA12 – PolyMide™ PA612-CF is a copolymer combining PA6 and PA12 with 15% chopper carbon fiber to deliver high stiffness, tensile strength and heat resistance with lower moisture sensitivity. PolyMide™ PA612-CF offers the best middle ground between PA6 and PA12 and is a great-all-rounder for real-world applications that require the higher mechanical performance and affordability of short-chain nylon (PA6) with the reduced moisture sensitivity of long-chain nylon (PA12).
- Reduced Moisture Sensitivity – In most applications nylon parts absorb moisture from the air. The water molecule increases toughness and durability of the nylon while reducing strength and stiffness. PA6 is more susceptible to absorbing moisture than PA12 and as a result the mechanical properties of PA6 are effected in some application environments. PolyMide™ PA612-CF is less hygroscopic than PA6-CF making it an ideal and cost-effective alternative to PolyMide™ PA6-CF for parts which may be subject to high humidity.
- Excellent Heat Resistance – Featuring a high heat resistance after annealing[1], PolyMide™ PA612-CF offers excellent heat resistance for demanding applications where heat and stress are critical design factors.
- Outstanding Layer Adhesion – Most fiber reinforced materials show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymakers Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. The implementation of this technology in PolyMide™ PA612-CF not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.
- Warp-Free™ – Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification. The Warp-Free™ technology in PolyMide™ PA612-CF is designed to work best with minimal bed temperatures.
- Excellent Printability – Unlike many other brands of Nylon filament, PolyMide™ PA612-CF is extremely easy to work with, exhibiting excellent dimensional stability during printing. It is compatible with most filament-based 3D printers capable of reaching 260°C nozzle temperature and no heated bed or chamber is required!
- Uncompromised Quality – Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.
[1] PolyMide™ PA612-CF displays the best mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization during the printing process, an additional step is required: Annealing. PolyMide™ PA612-CF can be annealed in the oven at 80˚C for 6 hours right after the printing process.
TDS Download SDS Download
| Weight | 0.5 kg |
|---|---|
| Dimensions | 210 × 210 × 50 cm |
| Brand | |
| Colour | Black |
Related products
Add to cart DetailsBuy NowNylon Glass Fiber is a high quality filament of reinforced polyamide with glass fibers. This material is ideal for prototypes that need optimal mechanical and heat resistance. It comes on a vacuum packed 1KG cardboard reel.
Add to cart DetailsBuy Now1kg high quality premium and well priced 1.75mm PLA Pro 3D Printer composite CF filament. It was engineered, similar to other PLA+ materials, for better printing performance. 15% CF
- Add to cart DetailsBuy Now
eSUN ePA12 Nylon 1.75mm Filament – comes on a vacuum packed 1KG Roll and is a tough and semi-flexible material that offers high impact and abrasion resistance. It is an ideal choice for printing durable parts.
- Select options This product has multiple variants. The options may be chosen on the product page Details
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.
Reviews
There are no reviews yet.