Category: Gloss & Metallic

Shiny bright printed surface and little laminated striation, supporting structure is easy to peel off. Gloss PLA has higher toughness, not easy to break.

Showing all 17 results

Quick View

eSun ePLA-Metal Antique Brass 1.75mm
$38.90
1kg - Antique Brass
Metal PLA offers a metallic finish with subtle layer visibility, producing a rustic, antiqued effect.
Add to cart Details Buy Now
Quick View

eSun ePLA-Metal Gold 1.75mm
$38.90
1kg - Gold
Metal PLA offers a metallic finish with subtle layer visibility, producing a rustic, antiqued effect.
Add to cart Details Buy Now
Quick View

eSun Gloss Black 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - Black
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Add to cart Details Buy Now
Quick View

eSun Gloss Grey 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - Grey
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Add to cart Details Buy Now
Quick View

eSun Gloss Orange 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - Orange
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Add to cart Details Buy Now
Quick View

eSun Gloss Red 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - Red
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Add to cart Details Buy Now
Out of Stock
Sold Out
Quick View

eSun Gloss White 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - White
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Read more Details

Quick View

eSun Gloss Yellow 1.75mm
Original price was: $33.90.Current price is: $29.90.
1kg - Yellow
eSun Gloss PLA prints are glossy color and compared with ABS it has higher rigidity and PC-like strength without needing an enclosure. It comes on a vacuum packed 1kg roll.
Add to cart Details Buy Now

Quick View

Metallic Aluminium PLA – 1.75mm Eco Premium Metal-Like Filament
$34.90
1kg - Metallic Aluminium
3DEA Metal-Like PLA can output prints with a metal like shine color. It comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now

Quick View

Metallic Brass PLA – 1.75mm Eco Premium Metal-Like Filament
$34.90
1kg - Metallic Brass
3DEA Metal-Like PLA can output prints with a metal like shine color. It comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now

Quick View

Metallic Bronze PLA – 1.75mm Eco Premium Metal-Like Filament
$34.90
1kg - Metallic Bronze
3DEA Metal-Like PLA can output prints with a metal like shine color. It comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now

Quick View

Metallic Copper PLA – 1.75mm Eco Premium Metal-Like Filament
$34.90
1kg - Metallic Copper
3DEA Metal-Like PLA can output prints with a metal like shine color. It comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now

Quick View

Metallic Gold PLA – 1.75mm Eco Premium Metal-Like Filament
$34.90
1kg - Metallic Gold
3DEA Metal-Like PLA can output prints with a metal like shine color. It comes on an eco friendly vacuum sealed cardboard reel and box packed.
Add to cart Details Buy Now

Quick View

PolyLite™ Metallic Blue PLA Pro 1.75mm
Original price was: $45.00.Current price is: $42.90.
1kg - Metallic Blue
PolyLite™ PLA Pro is a first of its kind: combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Add to cart Details Buy Now

Quick View

PolyLite™ Metallic Green PLA Pro 1.75mm
Original price was: $45.00.Current price is: $42.90.
1kg - Metallic Green
PolyLite™ PLA Pro is a first of its kind: combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Add to cart Details Buy Now

Quick View

PolyLite™ Metallic Magenta PLA Pro 1.75mm
$45.00
1kg - Metallic Magenta
PolyLite™ PLA Pro is a first of its kind: combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Add to cart Details Buy Now

Quick View

PolyLite™ Metallic Red PLA Pro 1.75mm
Original price was: $45.00.Current price is: $42.90.
1kg - Metallic Dark Red
PolyLite™ PLA Pro is a first of its kind: combining high toughness and high rigidity, this professional PLA offers engineering properties with the ease of print of regular PLA.
Add to cart Details Buy Now

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less

Andrew Jackson

5

I was directed to 3D... Read More
I was directed to 3DEA by a work colleague as I was new to 3D printing and they were right about them. Great quality PLA (and many other types), awesome range of colours and great pricing. I've bought 4 different rolls so far and they have all been great, no clogging and brilliant print quality. Read Less

Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

Write a review!

Category: Gloss & Metallic

eSun ePLA-Metal Antique Brass 1.75mm

eSun ePLA-Metal Gold 1.75mm

eSun Gloss Black 1.75mm

eSun Gloss Grey 1.75mm

eSun Gloss Orange 1.75mm

eSun Gloss Red 1.75mm

eSun Gloss White 1.75mm

eSun Gloss Yellow 1.75mm

Metallic Aluminium PLA – 1.75mm Eco Premium Metal-Like Filament

Metallic Brass PLA – 1.75mm Eco Premium Metal-Like Filament

Metallic Bronze PLA – 1.75mm Eco Premium Metal-Like Filament

Metallic Copper PLA – 1.75mm Eco Premium Metal-Like Filament

Metallic Gold PLA – 1.75mm Eco Premium Metal-Like Filament

PolyLite™ Metallic Blue PLA Pro 1.75mm

PolyLite™ Metallic Green PLA Pro 1.75mm

PolyLite™ Metallic Magenta PLA Pro 1.75mm

PolyLite™ Metallic Red PLA Pro 1.75mm

FREE SHIPPING for AKL @ $180 | NI @ $300 | SI @ $360

© 2024 FISAG Ltd – 3DEA