Category: eSun PLA+

Name: 3DEA
Address: Keith Hay Court, Silverdale, Auckland, 0932
Rating: 4.7

This affordable improved filament has good consistency, rigidity and great surface finish with higher toughness characteristics than standard PLA. It will work natively with your 3D printer with the stock PLA settings. No additional customization is needed.

Showing all 39 results

eSun Beige PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Beige
eSun Beige (former Skin Colour) PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Black 3kg Bulk PLA+ 1.75mm
$88.00
3kg - Black Bulk
eSun Black PLA+ Filament 1.75mm – comes on a vacuum packed 3KG roll
Add to cart Details Buy Now
eSun Black PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
Rated 5.00 out of 5
1kg - Black
eSun Black PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Blue PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Blue
eSun Blue PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Bone White PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Bone White
eSun Bone White PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Brown PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Brown
eSun Brown PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Cold White PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Cold White
eSun Cold White PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Dark Blue PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Dark Blue
eSun Dark Blue PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Fire Engine Red PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Fire Engine Red
eSun Fire Engine PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Gold PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Gold
eSun Gold PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Green PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Green
eSun Green PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Grey 3kg Bulk PLA+ 1.75mm
$88.00
3kg - Grey Bulk
eSun Grey Bulk PLA+ Filament 1.75mm – comes on a vacuum packed 3KG roll
Add to cart Details Buy Now
eSun Grey PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Grey
eSun Grey PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Light Blue PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Light Blue
eSun Light Blue PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Light Brown PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Light Brown
eSun Light Brown PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Magenta PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Magenta
eSun Magenta PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Olive Green PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Olive Green
eSun Olive Green PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Orange PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Orange
eSun Orange PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Peak Green PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Peak Green
eSun Peak Green PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Pine Green PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Pine Green
eSun Pine Green PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Pink PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
Rated 5.00 out of 5
1kg - Pink
eSun Pink PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun PLA+ 10x 1Kg – Mixed
Original price was: $300.00.Current price is: $293.90.
10 rolls mixed colour eSun PLA+ – stated price is for 10x1kg
Select options Details
eSun PLA+ 6x 1Kg – Mixed
Original price was: $180.00.Current price is: $172.90.
6 rolls mixed colour eSun PLA+ – stated price is for 10x1kg
Select options Details
eSun PLA+ Re-Filament Black 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Black
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun PLA+ Re-Filament Blue 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Blue
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun PLA+ Re-Filament Cold White 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Cold White
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun PLA+ Re-Filament Fire Engine Red 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Fire Engine Red
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun PLA+ Re-Filament Red 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Red
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun PLA+ Re-Filament White 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - White
eSun PLA+ Re-Filament 1.75mm – comes as a vacuum packed 1KG Roll to be used with a master spool.
Add to cart Details Buy Now
eSun Purple PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Purple
eSun Purple PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Red 3kg Bulk Roll PLA+ 1.75mm
$88.00
3kg - Red
eSun Red Bulk PLA+ Filament 1.75mm – comes on a vacuum packed 3KG roll
Add to cart Details Buy Now
eSun Red PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
Rated 4.00 out of 5
1kg - Red
eSun Red PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Silver 3kg Bulk Roll PLA+ 1.75mm
$88.00
3kg - Silver Bulk
eSun Silver Bulk PLA+ Filament 1.75mm – comes on a vacuum packed 3KG roll
Add to cart Details Buy Now
eSun Silver PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Silver
eSun Silver PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Space Blue PLA+ 1.75mm
Original price was: $30.75.Current price is: $29.90.
1kg - Space Blue
eSun Space Blue PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Very Peri PLA+ 1.75mm
Original price was: $30.75.Current price is: $29.90.
1kg - Very Peri
eSun PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun White 3kg Bulk PLA+ 1.75mm
$88.00
Rated 5.00 out of 5
3kg - White Bulk
eSun White Bulk PLA+ Filament 1.75mm – comes on a vacuum packed 3KG roll
Add to cart Details Buy Now
eSun White PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
Rated 5.00 out of 5
1kg - White
eSun White PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now
eSun Yellow PLA+ 1.75mm
Original price was: $30.50.Current price is: $29.90.
1kg - Yellow
eSun Yellow PLA+ Filament 1.75mm – comes on a vacuum packed 1KG roll
Add to cart Details Buy Now

Brendan

5

13 March 2024 - Revi... Read More
13 March 2024 - Review for:PETG-CF – Carbon Fibre Enhanced PETG FilamentInteresting combination of materials. Has the stiffness of ASA but the toughness of PETG. Also like ASA, I found a tendency for the layers to separate if printed with the same temp as PETG. Raising the extruder temperature helped, but then I found blobs forming. A good balance seems to be 242degC with a touch of fan.I'm printing on a Garolite print bed and found I had to bring the bed temp down to 70degC, any hotter and the print is very hard to remove!Also, remember you'll need a steel nozzle, as apparently the CF will ream out your orifice quick smart. The filament is hygroscopic so needs to be dried before use.My suggestion - get PETG printing well, before moving onto this filament.My printing factors currently:Ender3 v2 with MicroSwiss DD Extruder 0.6mm hardened steel MicroSwiss Nozzle Retraction: 1.5mm Garolite Printbed Extruder Temp: 242degC Fan: 5% always on | Bridges: 40% Layer Height: .24mm Perim: 35mm/s Small Perim: 25 mm/s Ext PErim: 20 mm/sREVIEW FOR ASA Blue-GreyPrinted the three parts in the photo attached, individually on an Ender 3 v2 without an enclosure, but with a printed draft shield.Nozzle at 250 degC first layer, then 246 degC for the following layers Bed at 102 degC first layer, then 98 degC for the following layersNote: I have a Capricorn PTFE Bowden Tube. Better temp durability than E3v2 stock Bowden tube.My bed plate is Garolite wet sanded with 1200 grit wet n dry and cleaned between prints with Isopropyl and paper towel.You don't want to be in the same room as the printer when printing ASA - smells bad. Also, once the first layer has finished, keep the door closed to avoid drafts.Print rough smoothed using 240 grit sandpaper, then 1200 wet n dry - wet sanded. ASA sands easily and down to a great finish.Next step is try printing in an enclosure and to try Acetone smoothing :)NOTE: The supplied filament reel's centre-hole is too small for my Ender 3 v2 reel holder. I use a dryer so all good, would be frustrating if you wanted to use a stock holder. EDIT: Must have had my eyes closed - The spool holes have filler plates! Removing these plates and my conundrum was solved :) Read Less
Andrew Jackson

5

I was directed to 3D... Read More
I was directed to 3DEA by a work colleague as I was new to 3D printing and they were right about them. Great quality PLA (and many other types), awesome range of colours and great pricing. I've bought 4 different rolls so far and they have all been great, no clogging and brilliant print quality. Read Less
Greedo Twerp

5

I was looking for a ... Read More
I was looking for a colour similar to the primer red seen on German WW2 heavy vehicles. Wanted to print a 1/4 scale model of a Tiger tank 88mm muzzle brake. Ordered the 3DEA "Brick Red" PLA which is a very good match. Never used prior and pleased to report printed faultlessly once I knocked the temp down to 200 degrees on my Kingroon KP3S. Printed at 0.10mm layer height, no stringing issues at all. Very happy customer. Already planning the next order, highly recommended. Read Less

Write a review!

Category: eSun PLA+

eSun Beige PLA+ 1.75mm

eSun Black 3kg Bulk PLA+ 1.75mm

eSun Black PLA+ 1.75mm

eSun Blue PLA+ 1.75mm

eSun Bone White PLA+ 1.75mm

eSun Brown PLA+ 1.75mm

eSun Cold White PLA+ 1.75mm

eSun Dark Blue PLA+ 1.75mm

eSun Fire Engine Red PLA+ 1.75mm

eSun Gold PLA+ 1.75mm

eSun Green PLA+ 1.75mm

eSun Grey 3kg Bulk PLA+ 1.75mm

eSun Grey PLA+ 1.75mm

eSun Light Blue PLA+ 1.75mm

eSun Light Brown PLA+ 1.75mm

eSun Magenta PLA+ 1.75mm

eSun Olive Green PLA+ 1.75mm

eSun Orange PLA+ 1.75mm

eSun Peak Green PLA+ 1.75mm

eSun Pine Green PLA+ 1.75mm

eSun Pink PLA+ 1.75mm

eSun PLA+ 10x 1Kg – Mixed

eSun PLA+ 6x 1Kg – Mixed

eSun PLA+ Re-Filament Black 1.75mm

eSun PLA+ Re-Filament Blue 1.75mm

eSun PLA+ Re-Filament Cold White 1.75mm

eSun PLA+ Re-Filament Fire Engine Red 1.75mm

eSun PLA+ Re-Filament Red 1.75mm

eSun PLA+ Re-Filament White 1.75mm

eSun Purple PLA+ 1.75mm

eSun Red 3kg Bulk Roll PLA+ 1.75mm

eSun Red PLA+ 1.75mm

eSun Silver 3kg Bulk Roll PLA+ 1.75mm

eSun Silver PLA+ 1.75mm

eSun Space Blue PLA+ 1.75mm

eSun Very Peri PLA+ 1.75mm

eSun White 3kg Bulk PLA+ 1.75mm

eSun White PLA+ 1.75mm

eSun Yellow PLA+ 1.75mm