DropEffect NeXtG Hotend by Phaetus

Extreme Gradient Hotend for Ultra High Flow Applications – comes in two versions.

Ultra High Flow Rate (UHF)

To achieve higher flow rates, the neXtG Hotend was developed with a new heating element and hotend design.

With the ultra-high-flow groove adapter, the melting zone can be expanded even further to achieve a maximum flow rate of up to 45 mm³/s.

Rigid kinematic coupling system

The kinematic coupling system of the neXtG hotend ensures high rigidity of the heating block and noticeably minimises heat transfer to the heat sink.

The rigid structure performs some protective functions:

• Protects the heating block from bending if the bed levelling fails;
• Protects the heatbreak if the nozzle passes over an unsuccessful print.

Tip: The nozzle can be changed with one hand. Even if the nozzle is overtightened, the heatbreak is protected by the rigid structure of the system.

Compatibility with V6 nozzles

Like its predecessor, the XG-Hotend, the neXtG Hotend was equipped with the V6 nozzle system for more nozzle selection.

Same footprint as a Dragon Hotend

The neXtG has the same dimensions as the Dragon Hotend, which makes it compatible with the majority of Dragon hotend attachment systems (e.g. Voron, Creality etc.). With the groove mount adapter, it can also be used on Prusa printers (e.g. MK2, MK3, etc.).

Optimised ceramic heating

The neXtG Hotend uses an efficient ceramic heating plate, which is more cost-effective and easier to maintain compared to a ceramic ring heater.

Tip: The neXtG Hotend can be used immediately on Voron and Prusa 3D printers, it can also be adapted for Creality 3D printers. Special adapters are required for all other models.

Included in Standard Red:

• 1 x neXtG hotend
• 1 x UHF Silicone Sock
• 1 x Groove Mount Adapter
• 1 x Coated Copper Nut
• 1 x Plated Copper Nozzle 0.4mm
• 1 x Plated Copper Nozzle 0.6mm
• 1 x 1m white extension cable for the temperature sensor
• 1 x 1m Heater Extension Cable
• 1 x H1.5 Hex Key
• 1 x H2.0 Hex Key
• 4 x M2.5×5 countersunk hex screws
• 1 x Thermal Paste
• 4 x M3x8 hexagon socket countersunk screw
• 2 x M2.0x4 hexagon socket screw with pan head
• 1 x M2.0x4.0 Titanium Alloy Screw
• 1 x H5.0 open-end wrench
• 1 x H6.0 open-end wrench
• 1 x H7.0 open-end wrench
• 1 x H9.0 open-end wrench
• 1 x H10.0 open-end wrench
• 3 x Cable Ties
• 1 x Bowden cable
• 1 x collect clip

Technical specifications Standard Red: